Reach New Ceiling Heights with The FlatHat™ System

Reach New Ceiling Heights with The FlatHat™ System

We Hear it Every Day…Installing Signage from Tall Ceiling Heights is Difficult and Dangerous

Hanging signs from ceilings using ladders or lifts can be dangerous and complicated. The challenges and dangers are magnified when trying to access tall ceilings over 27 feet in height, leaving people hesitant to utilize this valuable space for hanging effective visual displays.

Ceiling Outfitters® says ditch the traditional heavy tool belt, unsafe ladders and expensive lifts for our new and innovative solution, making sign installations and change-outs from areas with very tall ceilings SIMPLE, FAST, and SAFE with your feet planted firmly on the floor.

Introducing the FlatHat™ System– The Solution to Hanging Signs from very TALL Ceilings!

The FlatHat™ system virtually lowers the ceiling to a more accessible height and then works in conjunction with components of the Clik-Clik™ Magnetic Sign Hanging System to install and retrieve signs.

How Does the FlatHat Receiver Work?

Start by attaching two lengths of steel cable to the ceiling by wrapping it around a steel girder and securing the connection using either our UrbanTrapeze™ cable gripper or crimps. Separate the two lengths of cable by about 24 inches.

Connect a FlatHat Receiver to the loose end of each cable by threading the cable down through one side of an UrbanTrapeze and the ring on the FlatHat Receiver. Close the connection by threading the cable up through the opposite side of the UrbanTrapeze.

Ideally, the receiver should be at a height of about 15-20 feet from the floor positioning the bottom of the sign no closer than 10 feet from the floor or at a height specified by company policy.

With the push of a button on the UrbanTrapeze, incrementally fine tune the height from the floor and level the sign.  This is the last time you will need to use a lift to access the ceiling.

As with the traditional Clik-Clik™ system, use LoopLine™ to connect one of our round ClikMagnets™ to the sign. Using the Clik-Clik™ installation tools, the MagPole™ and 24 Inch Adjustable MagMover™, raise the sign up to the FlatHat Receiver and later retrieve it when changing out signs.

Specially designed flared edges on the receiver guide the round ClikMagnets quickly into place.  A built-in metal plate ensures a secure connection. Use of the Standard 6 Inch Dual MagMover™ is not recommended with the FlatHat system.

Virtually Lower Your Ceiling Height with a FlatHat Reciever

To begin accessing very tall ceilings and virtually lower your ceiling height, order the FlatHat Receiver, Steel Cable, UrbanTrapeze cable adjusters, and Round ClikMagnets™ today along with the full Clik-Clik™ Sign Hanging System.

About Ceiling Outfitters:

Since 2007, Ceiling Outfitters® has partnered with over 2,000 organizations and 22,000 stores nationally within the retail, manufacturing, education, and hospitality industries. Ceiling space and storefront windows are optimal visual display locations and we help customers utilize these areas safely, quickly, easily and more economically.

We are the master distributor of the Clik-Clik™ family of products, the premier magnetic hanging system that transforms the ceiling eco-system into a workable location for strategic placement of ceiling signs and displays and helps employees suspend items without a ladder or lifting device.